Dust-Hog SUPRA-CONIC Owner's Manual download pdf (Page 5)

United Air Specialists, Inc.

Supra-Pulse FJH Series

Cartridge Dust Collector

Revised 02/02

1. IMPORTANT NOTICE

This manual contains important safety information and

precautionary measures. It is impossible to list all

potential hazards associated with every dust collection

system in each application. Proper use of the equipment

must be discussed with United Air Specialists, Inc.

(UAS) or your local DUST-HOG

representative.

Operating personnel must be aware of, and adhere to,

the most stringent safety procedures.

1.1 GENERAL CAUTIONS ON USING DUST

CONTROL EQUIPMENT

1. Avoid mixing combustible materials such as

aluminum, paper, wood or other organic dusts, with

dusts generated from grinding or welding metals. A

fire hazard could develop from sparks entering the

dust collector. When collecting flammable or

explosive materials, the dust collector should be

located outdoors and incorporate the appropriate

safety measures and/or accessories.

2. When collecting emissions from spark-producing

processes, care must be taken to reduce any

potential fire hazards. System design should include

methods to prevent sparks from entering the dust

collector. Dust collectors do not contain fire

extinguishing equipment unless specifically ordered.

Experts in the field of fire extinguishing equipment

should be consulted for recommendations

concerning proper fire detection and suppression

systems.

3. Some dust collection systems require explosion

venting. Consult your insurance underwriter, NFPA

(National Fire Protection Association) Manual and

your local fire authorities to determine the

requirements for explosion venting.

4. Be careful and conscientious — consult national and

local fire codes, waste disposal, safety and other

appropriate authorities and comply with their

recommendations for the proper installation and

operation of dust collection equipment.

2. INTRODUCTION

Thank you for selecting DUST-HOG dust collection

equipment to assist you in your commitment to a clean

and safe environment. We trust in purchasing our

product you have recognized our commitment to

continually offer dust collection equipment engineered to

each dust collection need and manufactured to the

highest quality standards.

The Supra-Pulse Cartridge Dust Collector is designed

to collect process-generated dusts. The Supra-Pulse

provides continuous-duty cleaning and operation in its

application to improve the work environment.

2.1 UNIT NOMENCLATURE

EXAMPLE: FJH 24-3-H

FJH — DUST-HOG Supra-Pulse

cartridge dust collector

24 — number of cartridge filters

3 — number of filters tiers

H — unit base arrangement

(hopper base includes one hopper

outlet per module)

2.2 DESCRIPTION AND OPERATION

The Supra-Pulse is a high efficiency, cartridge dust

collector designed to eliminate airborne dust as it is

generated. Contaminants are captured at the source(s),

then conveyed through ductwork to the cartridge filter

section where the dust is collected. Clean air is then

discharged from the unit.

There are two primary modes of operation. These are

the air filtering operation and the filter cleaning cycle as

shown in Figure 1.

CAUTION

A caution symbol is used when equipment could be

damaged if the procedures are not followed.

WARNING

A warning symbol means people may be injured if the

procedures are not followed.

1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments

Dust-Hog SUPRA-CONIC Owner's Manual Page 5

Comments to this Manuals