Dust-Hog SUPRA-CONIC Owner's Manual download pdf (Page 15)

United Air Specialists, Inc.

Supra-Pulse FJH Series

Cartridge Dust Collector

Revised 02/02

DRUM LID INSTALLATION

Remove the drum lid package from its shipping carton.

Place the drum lid on a 55-gallon drum (optional). Slide

the 14" hose over the drum lid and secure with a hose

clamp. Position the drum assembly under the unit, slide

the hose up onto the discharge adapter collar on the

hopper and secure with a hose clamp.

If a drum lid latch kit was ordered, attach the separate

clamp band around the 55-gallon drum, leaving the

cinch bolt loose. Position the three latch pawls onto the

drum lid catches, rotating the drum lid as required.

Tighten the cinch bolt and adjust the latch tension and/

or band placement as required (see Figure 8).

If a slide gate was ordered, it was factory installed on

the hopper. Open the slide gate. Repeat for multiple

drum lid connections.

NOTE: The hopper is not designed for dust storage.

The slide gate should remain open during

normal operation.

Figure 7. Abrasive Resistant Inlet Installation

Figure 8. Drum Lid Installations

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

Dust-Hog SUPRA-CONIC Owner's Manual Page 15